Lead and Copper Information

Press Enter to show all options, press Tab go to next option


Every three years the City of Palm Bay Utilities conducts a free Lead and Copper test in compliance with the Florida Department of Environmental Protection (FDEP) on homes built between 1983-1986. Palm Bay Utilities Water Main  lines do not contain lead or copper. This test detects lead and copper that may be found between a customer’s home and service lines. Lead and copper are primarily introduced to drinking water through the corrosion of plumbing materials which contain lead and copper.

Click here to read more about EPA drinking water requirements for states and public water systems and the the Lead and Copper Rule.


Click here to watch a video of what to expect for lead and copper testing procedures.

If you have any questions please contact Palm Bay Utilities at 321-952-3410.






 Lead and Copper in Drinking Water

If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. The City of Palm Bay is responsible for providing high quality drinking water, but cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 15 to 30 seconds or until it becomes cold or reaches a steady temperature before using water for drinking or cooking. Keep Your Water Safe Brochure

Lead Health Effects

Lead is a common metal that has been in many consumer products but is now known to be harmful to human health if ingested or inhaled. It can be found in lead-based paint, air, soil, household dust, food, some types of pottery, and drinking water. Lead is rarely found in natural sources of water such as rivers and lakes or underground aquifers.

When people come in contact with lead, it may enter their bodies and accumulate over time, resulting in damage to the brain, nervous system, red blood cells, and kidneys. Infants and children who drink water containing lead in excess of the action level could experience delays in their physical or mental development. Children could show slight deficits in attention span and learning abilities.

Lead in water can be a special problem for infants whose diets may be mostly liquids, such as baby formulas or concentrated juices mixed with water. Smaller bodies can absorb lead more rapidly than bigger ones, so amounts of lead that won't hurt an adult can be very harmful to a child. Adults who drink this water over many years could develop kidney problems or high blood pressure.

Copper Health Effects

Copper is a reddish metal that occurs naturally in rock, soil, water, sediment, and air. It has many practical uses in our society and is commonly found in coins, electrical wiring, and pipes. It is an essential element for living organisms, including humans, and - in small amounts - necessary in our diet to ensure good health. However, some people who drink water containing copper in excess of the action level over a relatively short amount of time could experience adverse health effects, including vomiting, diarrhea, stomach cramps, and nausea. Some people who drink water containing copper in excess of the action level over many years could suffer liver or kidney damage.

The human body has a natural mechanism for maintaining the proper level of copper in it. However, children under one year old have not yet developed this mechanism and, as a result, are more vulnerable to the toxic effects of copper. People with Wilson's disease also have a problem with maintaining the proper balance and should also exercise particular care in limiting exposure to copper. People with Wilson's Disease should consult their physician.

Sources of Lead/Copper in drinking water

Lead usually gets into your water after it leaves the treatment plant. This usually happens through the corrosion of materials containing lead in household plumbing. The most likely sources of lead in your household water are lead pipes, lead solder on copper pipes, brass faucets, fittings, and valves, including those advertised as "lead-free," or lead service lines connecting the water main to the inside plumbing. Lead pipes are no longer installed for service lines or in household plumbing and lead solder has been outlawed since 1986.

The amount of lead allowed in brass fixtures has also been limited, but can still contribute some lead to drinking water (note that many faucets are made of brass even if they do not have a "brass" color). Even with these restrictions in place, some homes, especially older homes, may still have significant amounts of lead in their plumbing systems.

Homes built between 1983 and 1986 are more likely to have lead pipes, fixtures and solder. However, new homes are also at risk: even legally "lead-free" plumbing may contain up to 8 percent lead. The most common problem is with brass or chrome-plated brass faucets and fixtures which can leach significant amounts of lead into the water, especially hot water.

Copper works its way into the water by dissolving from copper pipes in the household plumbing. The longer the water has stood idle in the pipes, the more copper it is likely to have absorbed. Newer homes with copper pipes may be more likely to have a problem. Over time, a coating forms on the inside of the pipes and can insulate the water from the copper in the pipes. In newer homes, this coating has not yet had a chance to develop.

How to Reduce Your Exposure

Run your water to flush out lead.
Anytime the water has not been used for more than 6 hours - overnight, for example, or during the day when people are gone to work or school - it should be cleared from the pipes before being used for drinking or cooking. Let the cold water faucet run until you can feel the water getting colder or reach a steady temperature, usually 30 to 60 seconds. The amount of time it takes will depend on your home and how its plumbing is arranged.

Other household water uses will also help clear standing water from your home's plumbing. For example, you may want to establish a routine of doing household tasks that use water - such as showering, flushing the toilet, or running the dishwasher - first thing in the morning before using water for drinking or cooking. Keep in mind that you'll still need to flush individual faucets for a short time before using them for drinking water. The water you run from drinking water taps does not have to be wasted. You can use this water for cleaning purposes or for watering plants. You may want to keep a container of drinking water in your refrigerator, so you don't have to run water every time you need it.

Use cold water for cooking and preparing baby formula.
Hot water dissolves lead/copper more quickly than cold water so don't use water from your hot-water faucet for cooking or drinking. If you need hot water for cooking or drinking, take water from the cold water tap and heat it. It is especially important not to use the hot water for making baby formula. Also, boiling the water does not reduce lead levels and may actually increase them.

Identify if your plumbing fixtures contain lead.  
New brass faucets, fittings, and valves, including those advertised as "lead-free", may contribute lead to drinking water. The law currently allows end-use brass fixtures, such as faucets, with up to .25 percent lead to be labeled as "lead free". Visit the National Sanitation Foundation Web site at nsf.org to learn more about lead-containing plumbing fixtures.

For More Information
Call Utilities Customer Services at 321-952-3420. For more information on reducing lead exposure around your home and the health effects of lead, visit EPA's Web site at www.epa.gov/safewater/lead, call the National Lead Information Center at 800-424-LEAD, or contact your health care provider.