High Consumption, Leaks, & Credits

Many times there are reasons your water bill may be higher than usual.  For instance:

  • Recent House Guests
  • Filling your Swimming Pool
  • Increased Outdoor Irrigation

However, if your water bill is much higher than usual for no apparent reason, you may have a leak.  Finding and fixing leaks can be easy and inexpensive.  Here's how:

1)  Locate your water meter.

2)  Turn off all water - inside and outside your home.

3)  Read your meter and write down the figures.   The City of Palm Bay uses two types of
      water meters - a standard water meter and a radio frequency water meter. See link
      below for how to read yours.

How to Read A Standard Water Meter

How to Read A Radio Frequency Water Meter

4)  Wait 15 to 20 minutes and read it again.

5)  If the figures on your water meter have changed, there is a leak somewhere.  Your
      next step is to find the source of the leak.

CHECK YOUR TOILETS FIRST .  .  .leak detection kit
Toilets are the most common source of leaks inside the
home.  You can conduct a simple test to determine if
your toilet is leaking:

  • Put a few drops of food coloring or a dye tablet in
    the toilet tank.
  • Wait 15 minutes.
  • If colored water appears in the bowl, you have a leak. 
  • Your flush valve ball or toilet flapper may need to be
    repaired or replaced.

Free Leak Detection Kits are available at Utilities Customer Service located at 120 Malabar Road SE in the City Hall Annex.


WHEN TO CALL AN EXPERT .  .  .
If your meter indicates a leak and you cannot find it, or if you are hesitant about
tackling any repairs, call a licensed and insured plumber.